FABRIC CUTTER AUTOMATED LOW-PLY DEMATRON LX-6016
X, Y, Z and C four axis action forms three-dimensional cutting planes, which optimizes perfect curve cutting. The LX-6016 is equipped with AC Servo Motors and Transistor Inverters ensuring a very precise cutting operation.
The cutter is equipped with specially designed software - which distinguishes between lines and curves - giving the cutter an intuitive ability to adjust the cutting speed according to the complexity of patterns being cut.
Integrated vacuum system flattens the material in the entire cutting area eliminating material movement between the layers.
The double sided knife sharpening system makes blades even on both sides, extending the usable life of the knife exponentially over similar systems.
Consumables & Materials Efficiency:
The time interval of blade sharpening is adjustable according to the variation of fabric textures, allowing the blades to last longer after each cut.
The Knife Control Plate has anti-static properties - unique to this cutter - which means that all the consumable materials need no separate anti-static treatment.
The Grinding Stones are made with diamond powder, increasing the life of the stones by wearing down at a slower rate.
The bristles are made with a special macro-molecule material which is soft enough to avoid being cut by the knife, while at the same time lasting 30% longer than that of bristles used in other cutters in the industry. The bristles are also denser than on competing systems, eliminating the need for underlay paper on most fabrics.
Sealed Bristle Vacuum Box prevents air escape eliminating unnecessary waste of power from the vacuum pump.
Vacuum strength can be set at seven different levels, maintaining the optimum suction power depending on materials and number of layers being cut. Eliminates the need to operate the vacuum at maximum capacity if not needed.
Plastic Film re-covers the fabric simultaneously while cutting to prevent the air leaking from the gaps between the cut pieces.